Part Number Hot Search : 
AT88SC MRF652 HT1137A 2N6009 XB1006 FR24N100 9945A MP6TP
Product Description
Full Text Search
 

To Download SQ2113 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 SQ2113
Elektronische Bauelemente
RoHS Compliant Product
CMOS Positive Voltage Regulator
Description
The SQ2113 series of positive,linear regulators feature low quiescent current (30A typ.) with low dropout voltage, making them ideal for battery applications. These rugged devices have both Thermal Shutdown, and Current Fold-back to prevent device failure under the "Worst" of operating conditions. The SQ2113 is stable with an output capacitance of 2.2F or greater.
Features
* High Accurate 1.5% * Over-Temperature Shutdown
REF. A B C D E F Millimeter Min. Max. 2.70 3.10 2.60 3.00 1.40 1.80 0.30 0.55 0 0.10 0 10 REF. G H I J K L Dimensions Millimeter 1.90 REF. 1.20 REF. 0.12 REF. 0.37 REF. 0.60 REF. 0.95 REF.
* Factory Pre-set Output Voltage * Very Low Dropout Voltage * Low Temperature Coefficient * Short Circuit Current Fold-back * Guaranteed 300mA output * Current Limiting
Applications
* PC Peripherals * Wireless Devices
* Portable Electronics * Battery Powered Widgets * Electronic Scales * Instrumentation * Cordless Phones
Block Diagram
Typical Application Circuit
IN IN
SQ2113
GND
OUT
OUT
+
C1 1uF
C2 2.2uF
5V
http://www.SeCoSGmbH.com/
Any changing of specification will not be informed individual
01-Jun-2002 Rev. A
Page 1 of 5
SQ2113
Elektronische Bauelemente
CMOS Positive Voltage Regulator
Absolute Maximum Ratings
Parameter
Input Voltage Output Current Output Voltage Operating Ambient Temperature Junction Temperature Max. Junction Temperature Thermal Resistance Power Dissipation ( EDS Classification
o
Symbol
VIN IOUT VOUT Topr Tj Tj Max.
Ratings
8
PD/(VIN-VO) 1.5~3.8 -40~+85 -40~+125 150 110 325 300
Unit
V mA
o o
V
C C
T=100 C)
o
jc ja
PD
C o W/ C W/ C
o
o
mW
B
Electrical Characteristics Ta=25 C
Parameter
Output Voltage Output Current Current Limit Load Regulation Dropout Voltage Quiescent Current
Symbol
VOUT (E) Io ILIM
REGLOAD
1
Min.
- 1.5% 300 300 -1
_ _ _
Typ.
VOUT (E)
_
2
Max.
1.5%
_ _
Unit
V mA mA
Condition
VIN=VOUT(T)+1V,1o=1mA VIN=VOUT(T)+2V,VOUTAVOUT(E)*0.96 Vo>1.2V
450 0.2
_ _ _
1 1300 400 300 50 0.2 0.15 0.1 0.4 7
_
_ _
%
mV uA
VIN=VOUT(T)+2V,Io=1mA to300mA 1.3V VOUT(T) 2.0V 2.0V < VOUT(T) 2.8V
2.8VVDROPOUT IQ
Io=300mA Vo=VOUT(E)-2%
_
30
_ _
VIN=VOUT(T)+1V
-0.2
Line Regulation
1.3V VOUT(T) 1.4V
%
REGLINE
-0.15 -0.1 -0.4
Note
_ _ _ _ _
3
0.02 0.2
_
Io=1mA 1.4V< VOUT(T) 2.0V VIN=VOUT(T)+1 to 2.0V< VOUT(T)<4.0V VOUT(T)+2 4.0VInput Voltage Over Temperature Shutdown Over Temperature Hystersis Output Voltage Temperature Coefficient Short Circuit Current
4
VIN OTS OTH TC ISC PSRR
V
o o
150 30 30 150 50 20 15 30
C C
o
ppm/ C mA dB VIN=VOUT(T)+1V,VOUT=0V f=1kHz f=10kHz f=100kHz uVrms Co=2.2uF Io=100mA Co=2.2uF f=10Hz~100kHz Io=10mA
300
_ _ _ _
Power Supply Rejection
_ _
Output Voltage Noise
eN
_
Note 1: VOUT (E) =Effective Output Voltage (i.e. the output voltage when "VOUT (T) +1.0V" is provided at the VIN pin while maintaining a certain IOUT value). 2: VOUT (T) =Specified Output Voltage 3: VIN (MIN) =VOUT+VDROPOUT 4: To prevent the Short Circuit Current protection feature from being prematurely activated, the input voltage must be applied before a current source load is applied.
http://www.SeCoSGmbH.com/
Any changing of specification will not be informed individual
01-Jun-2002 Rev. A
Page 2 of 5
SQ2113
Elektronische Bauelemente
CMOS Positive Voltage Regulator
Ordering Information(contd.)
Part Number
SQ2113-15 SQ2113-19 SQ2113-25 SQ2113-28 SQ2113-29 SQ2113-31 SQ2113-34 SQ2113-36 SQ2113-38
Marking
3A152 XXXX 3A192 XXXX 3A252 XXXX 3A282 XXXX 3A292 XXXX 3A312 XXXX 3A342 XXXX 3A362 XXXX 3A382 XXXX
Output Voltage
1.5V 1.9V 2.5V 2.8V 2.9V 3.1V 3.4V 3.6V 3.8V
Part Number
SQ2113-18 SQ2113-20 SQ2113-27 SQ2113-2H SQ2113-30 SQ2113-33 SQ2113-35 SQ2113-37
Marking
3A182 XXXX 3A202 XXXX 3A272 XXXX 3A2H2 XXXX 3A302 XXXX 3A332 XXXX 3A352 XXXX 3A372 XXXX
Output Voltage
1.8V 2.0V 2.7V 2.85V 3.0V 3.3V 3.5V 3.7V
Characteristics Curve
h tp://www.SeCoSGmbH.com/
Any changing of specification will not be informed individual
01-Jun-2002 Rev. A
Page 3 of 5
SQ2113
Elektronische Bauelemente
CMOS Positive Voltage Regulator
http://www.SeCoSGmbH.com/
Any changing of specification will not be informed individual
01-Jun-2002 Rev. A
Page 4 of 5
SQ2113
Elektronische Bauelemente
CMOS Positive Voltage Regulator
http://www.SeCoSGmbH.com/
Any changing of specification will not be informed individual
01-Jun-2002 Rev. A
Page 5 of 5


▲Up To Search▲   

 
Price & Availability of SQ2113

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X